XR3160ECU-F

MaxLinear
701-XR3160ECU-F
XR3160ECU-F

Ürt.:

Açıklama:
Arayüz - Özel Transceiver w/ 15KV ESD Protect

ECAD Modeli:
Bu dosyayı ECAD Aracınız için dönüştürmek için ücretsiz Library Loader dosyasını indirin. ECAD Model hakkında daha fazla bilgi edinin.

Stokta Var: 98

Stok:
98 Hemen Gönderilebilir
Fabrika Teslim Süresi:
2 Hafta Gösterilenden daha büyük miktarlar için fabrikada tahmini üretim süresi.
Minimum: 1   Çoklu: 1
Birim Fiyat:
-,-- €
Toplam Fiyat:
-,-- €
Tahmini Gümrük Vergisi:

Fiyatlandırma (EUR)

Miktar Birim Fiyat
Toplam Fiyat
8,42 € 8,42 €
7,89 € 78,90 €
6,87 € 171,75 €
6,61 € 661,00 €
6,36 € 1.679,04 €
5,16 € 2.724,48 €
5,05 € 5.332,80 €
2.508 Fiyat Teklifi

Ürün Niteliği Öznitelik Değeri Özellik Seçin
MaxLinear
Ürün Kategorisi: Arayüz - Özel
RoHS:  
Multiprotocol Transceiver
RS-232, RS-422, RS-485
5.5 V
3 V
2.5 mA
0 C
+ 70 C
SMD/SMT
SSOP-20
+/-15 kV
Marka: MaxLinear
Montaj Ülkesi: Not Available
Dağıtım Ülkesi: CN
Menşe Ülke: CN
Veri Hızı: 1 Mb/s, 20 Mb/s
Dubleks: Half/Full Duplex
İşlev: Transceiver
Neme Duyarlı: Yes
İşletim Besleme Voltajı: 3 V to 5.5 V
Çıkış Tipi: Differential
Paketleme: Tube
Pd - Güç Dağılımı: 662 mW
Ürün: Transceivers
Ürün Tipi: Interface - Specialized
Seri: XR3160E
Kapanma: With Shutdown
Fabrika Paket Miktarı: 66
Alt kategori:: Interface ICs
Birim Ağırlık: 453,600 mg
Bulunan ürünler:
Benzer ürünleri göstermek için en az bir onay kutusu seçin
Bu kategorideki benzer ürünleri göstermek için yukarıda en az bir onay kutusu seçin.
Seçilen özellikler: 0

Bu işlev için JavaScript'in etkinleştirilmesi gerekir.

CNHTS:
8542399000
CAHTS:
8542390000
USHTS:
8542390090
KRHTS:
8542311000
TARIC:
8542319000
MXHTS:
8542399999
ECCN:
EAR99

XR3160E RS-232/RS-485/RS-422 Transceivers & Eval Board

Exar XR3160E RS-232/RS-485/RS-422 Transceivers are advanced multiprotocol transceivers with 15KV ESD protection. All transmitter outputs and receiver inputs provide robust electrostatic discharge (ESD) protection to ±15kV IEC 61000-4-2 Airgap, ±15kV Human Body Model (HBM) and ±8kV IEC 61000-4-2 Contact. Full fail-safe protection is included on each receiver output to avoid system lockup, oscillation, or indeterminate states by defaulting to logic-high output level when the inputs are open, shorted, or terminated but undriven. XR3160E's high speed drivers operate up to 20Mbps in RS-485/422 modes, and up to 1Mbps in RS-232 mode. The RS-232 receiver inputs include a 5kΩ pull-down to ground when in RS-232 mode. The RS-485/422 receiver inputs are high impedance (>96kΩ), allowing up to 256 devices on a single communication bus (1/8th unit load). Operating from a single power supply from 3V to 5.5V, the shutdown mode consumes less than 1μA in low power standby operation with RS-232 receivers enabled. All drivers can be slew limited to 250kbps in any mode to minimize electromagnetic interference (EMI) by setting the dedicated SLEW pin low.

Exar offers an evaluation board for the XR3160E RS-232/RS-485/RS-422 Transceivers.
Learn More

XR3160E RS-232/RS-485/RS-422 Transceivers

MaxLinear XR3160E RS-232/RS-485/RS-422 Transceivers are advanced multiprotocol transceivers with 15KV ESD protection. All transmitter outputs and receiver inputs provide robust electrostatic discharge (ESD) protection to ±15kV IEC 61000-4-2 Airgap, ±15kV Human Body Model (HBM) and ±8kV IEC 61000-4-2 Contact. Full fail-safe protection is included on each receiver output to avoid system lockup, oscillation, or indeterminate states by defaulting to logic-high output level when the inputs are open, shorted, or terminated but undriven. XR3160E high speed drivers operate up to 20Mbps in RS-485/422 modes, and up to 1Mbps in RS-232 mode. The RS-232 receiver inputs include a 5kΩ pull-down to ground when in RS-232 mode. The RS-485/422 receiver inputs are high impedance (>96kΩ), allowing up to 256 devices on a single communication bus (1/8th unit load). Operating from a single power supply from 3V to 5.5V, the shutdown mode consumes less than 1μA in low power standby operation with RS-232 receivers enabled. MaxLinear drivers can be slew limited to 250kbps in any mode to minimize electromagnetic interference (EMI) by setting the dedicated SLEW pin low.