962876-3

TE Connectivity / AMP
571-962876-3
962876-3

Ürt.:

Açıklama:
Otomotiv Konnektörleri MICRO TIM KONT EDS

ECAD Modeli:
Bu dosyayı ECAD Aracınız için dönüştürmek için ücretsiz Library Loader dosyasını indirin. ECAD Model hakkında daha fazla bilgi edinin.

Stokta Var: 28.619

Stok:
28.619 Hemen Gönderilebilir
Fabrika Teslim Süresi:
18 Hafta Gösterilenden daha büyük miktarlar için fabrikada tahmini üretim süresi.
Minimum: 1   Çoklu: 1
Birim Fiyat:
-,-- €
Toplam Fiyat:
-,-- €
Tahmini Gümrük Vergisi:

Fiyatlandırma (EUR)

Miktar Birim Fiyat
Toplam Fiyat
0,439 € 0,44 €
0,37 € 3,70 €
0,33 € 8,25 €
0,315 € 31,50 €
0,281 € 70,25 €
0,257 € 257,00 €
0,237 € 592,50 €
Tam Makara (4000'in katları olarak sipariş verin)
0,229 € 916,00 €
0,219 € 1.752,00 €

Ürün Niteliği Öznitelik Değeri Özellik Seçin
TE Connectivity
Ürün Kategorisi: Otomotiv Konnektörleri
RoHS:  
Terminals
Receptacle (Female)
Cable Mount / Free Hanging
Crimp
Gold
20 AWG
17 AWG
Micro Timer II
Reel
Cut Tape
Marka: TE Connectivity / AMP
Kontak Türü: Socket (Female)
Montaj Ülkesi: Not Available
Dağıtım Ülkesi: Not Available
Menşe Ülke: DE
Akım Oranı: 10 A
Maksimum Çalışma Sıcaklığı: + 60 C
Minimum Çalışma Sıcaklığı: - 40 C
Ürün Tipi: Automotive Connectors
Fabrika Paket Miktarı: 4000
Alt kategori:: Automotive Connectors
Ticari Unvan: Timer
Tip: Quick Connect
Tel Ölçer Aralığı: 17 AWG to 20 AWG
Birim Ağırlık: 284 mg
Bulunan ürünler:
Benzer ürünleri göstermek için en az bir onay kutusu seçin
Bu kategorideki benzer ürünleri göstermek için yukarıda en az bir onay kutusu seçin.
Seçilen özellikler: 0

CNHTS:
8536901100
TARIC:
8536901000
CAHTS:
8536900020
USHTS:
8536904000
JPHTS:
853690000
MXHTS:
8536902800
BRHTS:
85389090
ECCN:
EAR99

Timer Interconnection System

TE Connectivity's (TE) Timer Interconnect System features contacts used extensively in the automotive industry. Each contact of this TE series consists of a flat receptacle, which mates with a flat tab. The receptacle has two respective four contact springs, which are independent of each other. Two-piece contacts with a steel top spring are predominantly. This two-piece contact design means that the electrical and mechanical properties are separated. One end of the contact body is either crimped to wire or soldered to a printed circuit board. The other end of the contact body mates with the matching tab.