INA241A4QDGKRQ1

Texas Instruments
595-INA241A4QDGKRQ1
INA241A4QDGKRQ1

Ürt.:

Açıklama:
Current Sense Amplifiers AEC-Q100 -4V to 110 V bidirectional ultr

ECAD Modeli:
Bu dosyayı ECAD Aracınız için dönüştürmek için ücretsiz Library Loader dosyasını indirin. ECAD Model hakkında daha fazla bilgi edinin.
Mouser şu anda bu ürünü bölgenizde satmamaktadır.

Stok Durumu

Stok:

Ürün Niteliği Öznitelik Değeri Özellik Seçin
Texas Instruments
Ürün Kategorisi: Akım Algısı Amplifikatörleri
Teslimat Kısıtlaması:
 Mouser şu anda bu ürünü bölgenizde satmamaktadır.
RoHS:  
INA241A
1 Channel
1.1 MHz
- 5 V to 110 V
150 dB
45 uA
25 uV
20 V
2.7 V
2.5 mA
0.003 %
- 40 C
+ 125 C
SMD/SMT
VSSOP-8
AEC-Q100
Reel
Cut Tape
MouseReel
3 dB Bant Genişliği: 1.1 MHz
Amplifikatör Tipi: Bidirectional
Marka: Texas Instruments
Montaj Ülkesi: Not Available
Dağıtım Ülkesi: Not Available
Menşe Ülke: MY
Tr - Giriş Voltajı Gürültü Yoğunluğu: 36 nV/sqrt Hz
Kazanç V/V: 100 V/V
Ios - Giriş Ofset Akımı: 3 uA
Neme Duyarlı: Yes
Ürün: Current Sense Amplifiers
Ürün Tipi: Current Sense Amplifiers
Yerleşme Süresi: 1.5 us
Kapanma: No Shutdown
SR - Dönüş Hızı: 8 V/us
Fabrika Paket Miktarı: 2500
Alt kategori:: Amplifier ICs
Bulunan ürünler:
Benzer ürünleri göstermek için en az bir onay kutusu seçin
Bu kategorideki benzer ürünleri göstermek için yukarıda en az bir onay kutusu seçin.
Seçilen özellikler: 0

Bu işlev için JavaScript'in etkinleştirilmesi gerekir.

CNHTS:
8542339000
CAHTS:
8542330000
USHTS:
8542330001
MXHTS:
8542330299
ECCN:
EAR99

INA241x/INA241x-Q1 Current Sense Amplifiers

Texas Instruments INA241x/INA241x-Q1 Current Sense Amplifiers are ultra-precise, bidirectional current sense amplifiers that can measure voltage drops across shunt resistors. This measurement is done over a wide common-mode range from -5V to 110V, independent of the supply voltage. The high-precision current measurement is achieved through a combination of small gain error (±0.01%, maximum), low offset voltage (±10µV, max), and a high DC CMRR (typical 166dB). The Texas Instruments INA241x/INA241x-Q1 is designed for high-voltage, bidirectional measurements in switching systems that see large common-mode voltage transients at the device’s inputs. The enhanced PWM rejection circuitry inside the INA241x/INA241x-Q1 ensures minimal signal disturbance at the output due to the common-mode voltage transitions at the input. The INA241x-Q1 devices are AEC-Q100 qualified for automotive applications.