TPS628610YCHR

Texas Instruments
595-TPS628610YCHR
TPS628610YCHR

Ürt.:

Açıklama:
Anahtarlama Voltaj Düzenleyicileri 1.75-V to 5.5-V 1-A ultra-low IQ step-d

ECAD Modeli:
Bu dosyayı ECAD Aracınız için dönüştürmek için ücretsiz Library Loader dosyasını indirin. ECAD Model hakkında daha fazla bilgi edinin.

Stokta Var: 22.022

Stok:
22.022 Hemen Gönderilebilir
Fabrika Teslim Süresi:
12 Hafta Gösterilenden daha büyük miktarlar için fabrikada tahmini üretim süresi.
Minimum: 1   Çoklu: 1
Birim Fiyat:
-,-- €
Toplam Fiyat:
-,-- €
Tahmini Gümrük Vergisi:
Paketleme:
Tam Makara (12000'in katları olarak sipariş verin)

Fiyatlandırma (EUR)

Miktar Birim Fiyat
Toplam Fiyat
Hazır Kesim Bant / MouseReel™
1,28 € 1,28 €
0,946 € 9,46 €
0,851 € 21,28 €
0,756 € 75,60 €
0,71 € 177,50 €
0,683 € 341,50 €
0,66 € 660,00 €
0,636 € 1.590,00 €
0,622 € 3.110,00 €
Tam Makara (12000'in katları olarak sipariş verin)
0,622 € 7.464,00 €
† 5,00 € MouseReel™ ücreti alışveriş sepetinize eklenecek ve hesaplanacaktır. MouseReel™ siparişleri iptal veya iade edilemez.

Ürün Niteliği Öznitelik Değeri Özellik Seçin
Texas Instruments
Ürün Kategorisi: Anahtarlama Voltaj Düzenleyicileri
RoHS:  
SMD/SMT
DSBGA-8
Buck
400 mV to 1.9875 V
1 A
1 Output
1.75 V
5.5 V
2.3 uA
4 MHz
- 40 C
+ 125 C
TPS62861
Reel
Cut Tape
MouseReel
Marka: Texas Instruments
Montaj Ülkesi: Not Available
Dağıtım Ülkesi: Not Available
Menşe Ülke: CN
Geliştirme Kiti: TPS628600EVM-109, TPS628601EVM-109
Giriş Voltajı: 1.75 V to 5.5 V
İşletim Besleme Akımı: 120 nA
Ürün Tipi: Switching Voltage Regulators
Kapanma: Shutdown
Fabrika Paket Miktarı: 12000
Alt kategori:: PMIC - Power Management ICs
Besleme Voltajı - Min: 1.75 V
Tip: Synchronous Step-Down Converter
Bulunan ürünler:
Benzer ürünleri göstermek için en az bir onay kutusu seçin
Bu kategorideki benzer ürünleri göstermek için yukarıda en az bir onay kutusu seçin.
Seçilen özellikler: 0

Bu işlev için JavaScript'in etkinleştirilmesi gerekir.

CNHTS:
8542399000
USHTS:
8542390070
ECCN:
EAR99

TPS6286x Synchronous Step-Down Converters

Texas Instruments TPS6286x High-Frequency Synchronous Step-Down Converters come with an I2C and VSEL-Interface. These devices provide an efficient, flexible, and high-power density point-of-load DC/DC solution. At medium to heavy loads, the converter operates in PWM mode. It automatically enters Power Save Mode operation at a light load to maintain high efficiency over the entire load current range. The device can also be forced into PWM mode operation for small output voltage ripple. Its DCS-control architecture achieves excellent load transient performance and tight output voltage accuracy. With the I2C interface and a dedicated VSEL pin, the output voltage is quickly adjusted to adapt the power consumption of the load to the ever-changing performance needs of the application. The Texas Instruments TPS6286x family has two VSEL pins and four factory preset voltages to allow usage without the I2C interface.